602-689-9049 Arizona - Statewide 602-689-9049
East Valley 480-515-9652
Northern Arizona 928-226-0423
what is a good psi for a pressure washer

What Is a Good PSI for a Pressure Washer

Back to blog
10 Wed 2021 Brent Orm Comments: 0

The PSI (pounds per square inch) of a pressure washer is vital while using it.

The measurement used to check the water pressure of a pressure washer is called PSI (pounds per square inch). The chemical bond between the stain and the cleaning can determine the number of PSI needed on a pressure washer. The stronger connections need more water pressure to remove the discoloration. Gallons per minute (GPM) is a flow rate unit.

After reading this article, should be able to choose a PSI with confidence. The PSI you use also depends on the task you’re doing with the pressure washer.

What Is a Good PSI for a Pressure Washer

It’s not always simple to acquire the correct PSI. Less is more with a pressure washer.

If the surface and stain are chemically connected, you’ll know what PSI level to employ. To remove the stain, use more water pressure since the bonding is more substantial. Gallons per minute (GPM) is a flow rate unit.

How Much PSI is Too Much

It’s hard to get the perfect PSI with a pressure washer. The average gas pressure washer is 2000-2800 PSI, whereas the typical electric pressure washer is 1300-1750 PSI.

Other equipment to be wary of besides pressure washers.

Other Pressure Washer Parts to Know

A pressure washer has two more components to be mindful of. The GPM and the CPU are two examples (cleaning power units).

The pressure washer’s water flow rate is GPM. The GPM is an important number to know if you want to know how fast your pressure washer cleans and rinses.

Initially, pressure washers with lower GPM rates may seem more efficient. However, higher GPM is usually preferred. The higher the GPM, the quicker the pressure washer can accomplish its job.

By multiplying the PSI by GPM, you can compute the Cleaning power units (CPUs). CPUs are also known as effective cleaning units. Pressure washers with higher CPU ratings will perform better.

After knowing more about pressure washers, you can decide better whether to buy one or hire one.

Commercial Pressure WashPressure Washers that are Available and How Do They Differ

If you use pressure washers, you should know the PSI required for each task, as well as the many varieties available.

Electric or gas can power a pressure washer.

Both types of pressure washers need a constant water supply (GPM) (gallons per minute). Most homeowners recommend using a power washer with a PSI range of 1300 to 2400.

Electric Pressure Washers

Electric pressure washers need 1300-1400 PSI and 12 GPM for mild cleaning. They are often quieter and more straightforward to manage than gas pressure washers. Most dishwashers come with detergent tanks.

Also, utilize an electric pressure washer with a GFCI-protected outlet (ground fault circuit interrupter). Use only 12 or 14 gauge extension cables.

Gas-Powered Washers

Gas-powered pressure washers need more GPM since most of them typically run at about 3000 PSI.

Larger jobs for pressure washing need gas-powered pressure washers.

10 Wed 2021 Brent Orm